Langsung ke konten utama

Assembling the Roland F-140R

* 5 1 0 0 0 4 7 2 6 7 - 0 1 * 
1 1 
Assembling the F-140R 
* To ensure that you assemble this unit correctly, please read this manual carefully before you begin assembly. Keep this manual nearby for reference when needed. * Keep this unit horizontal when lifting it during assembly or transport. * Be careful not to pinch your hands or drop this unit on your foot during assembly or transport. * You must obtain the assistance of at least one additional person when assembling or transporting this unit. * Keep small parts such as screws, stabilizers, and cord clamps out of the reach of small children to ensure that these items are not swallowed accidentally. * The screwdriver needed for assembly is not included. You will need to provide a Phillips screwdriver of the appropriate size for the screws. * You should initially tighten each screw loosely before tightening them to their final position. Start by tightening the screws until they are approximately half hidden. Do not use a 
power screwdriver when tightening the screws to their final position. Doing so may strip the threads. * Tighten the screws firmly, and place the unit at a location that is level and sure to remain stable. Never place the unit on a shag carpet. If you do so, the pedal may be unstable, 
causing damage. * Do not place the body of the piano directly on the floor. Doing so will damage the jacks and holders on the bottom of the piano, and also damage the bottom panel case. 
Copyright © 2015 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. 
Piano main unit 
Side board (left) 
Side board (right) 
Rear board 
Pedal board
Screws (6 x 18 mm): 6 pcs. 
Screws (5 x 20 mm): 6 pcs. 7Screws (4 x 14 mm): 6 pcs. 8Screws (4 x 16 mm): 2 pcs. 9Stabilizers (left/right) 
10 
Cord clamp: 2 pcs. 
Headphone hook: 1 pcs. 
1. Take the side board (right) and side board (left) out of the 
package, and position the side board packing material together to create a work surface. 
2. Take the piano main unit out of the package, remove the protective mat that surrounds it, and spread the mat out over your work surface. 
* Do not yet remove the protective material that is attached to the 
left and right of the piano main unit. If you remove this protective material and place the unit on the floor, protruding parts on the unit may scratch the floor, or the parts themselves may be damaged. 
Check the Parts 
1211 6 
3. Remove the protective material attached to the left and 
right of the piano main unit, and stand it upright on your work surface. 
* The protective sheet that is wrapped around the piano main unit must not be removed until you connect the pedal cord (step 9). Removing the protective sheet before that time will allow the keyboard cover to open, which may be hazardous. 
* Avoid grasping the unit by the keyboard lid when lifting it. 
123456789101112 
Screws (6 x 18 mm): use four screws 
If you find that it’s hard to get the screws to enter their holes, try pushing the piano in the direction shown by the arrow; you should then be able to fasten the screws. 
5. Attach the rear board to the side boards, and use the screws 
(5 x 20 mm) to fasten it provisionally. 
Avoid scratches! 
Screws (5 x 20 mm): use six screws 
6. Place the unit upright, and attach the stabilizers to the side 
boards. 
* Securely fasten the stabilizers to their final tightness at this time. 
Screws (4 x 14 mm): use six screws 
Stabilizers 
Right Left 
7. Attach the pedal board, and provisionally fasten it using the 
screws (6 x 18 mm). 
4. Attach the side board (right) and side board (left) to the piano main unit, and use the screws (6 x 18 mm) to fasten them provisionally. 
Avoid scratches! 
Screws (6 x 18 mm): 
use two screws Placing the pedal 
board (as seen from the side) 
Pedal board 
Metal parts 
10. Use screws (4 x 16 mm) to fasten the headphone hook. 
Screws (4 x 16 mm): use two screws 
11. Connect the supplied AC adaptor and power cord. 
8. Securely tighten each screw (twelve locations) in the order 
of the side boards, rear board, and pedal board. 
Do not allow a gap between the side board and the main unit. 
9. Connect the AC adapter to the DC In connector on the 
back of the piano, and connect the pedal cord to the Pedal connector. Attach the cord clamps to fasten the pedal cord and the AC adaptor cord (two locations). 
When moving the unit If you need to move the unit, close the keyboard cover and disconnect the AC adaptor. With at least one other person helping you, lift the unit horizontally and carry it, taking care not to pinch your hands or drop the unit on your feet. 
1
Power cord 
To AC outlet 
Place the AC adaptor so the side with the indicator faces upwards and the side with textual information faces downwards. The indicator will light when you plug the AC adaptor into an AC outlet. 

2

Komentar

Postingan populer dari blog ini

Pros and Cons of Donner's Dealer, a chat with Bing AI

  Let's learn together. Bing is powered by AI, so surprises and mistakes are possible. Make sure to check the facts, and   share feedback  so we can learn and improve! Terms of Use Privacy Statement Choose a conversation style Preview More Creative More Balanced More Precise undefined No problem, I’m glad you enjoyed our previous conversation. Let’s move on to a new topic. What do you want to know more about? Received message. No problem, I’m glad you enjoyed our previous conversation. Let’s move on to a new topic. What do you want to know more about? What are the pros and cons of being Donner Music's dealer? Sent message. What are the pros and cons of being Donner Music's dealer? Searching for:  pros and cons of being Donner Music dealer Searching for:  pros and cons of being Donner Music dealer Generating answers for you… Generating answers for you… I’m not sure about Donner Music specifically, but being a music dealer in general has its pros and cons. Some of the pros in

M-Audio AIR 192|4 USB C User Guide

User Guide English ( 2 – 5 )  Introduction  Box Contents  AIR 192|4 USB-C–to–USB-C Cable USB-C–to–USB-A Cable  Software Download Cards User Guide Safety & Warranty Manual  Support  For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit m-audio.com . For additional product support, visit m-audio.com/support .  Quick Start  Windows users: Before connecting AIR 192|4 to your computer, install the drivers: 1. Go to m-audio.com/drivers and download the latest AIR 192|4 driver for your operating system. 2. Open the file you downloaded and double-click the driver installer file. 3. Follow the on-screen instructions to install the drivers.  Software: We've included Pro Tools | First M-Audio Edition and Ableton Live Lite with your AIR 192|4 so you can get started making music with professional software right out of the box. Register your AIR 192|4 on m-audio.com , and follow the Pro Tools |