Synthesizer
Owner’s Manual
Contents
Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Panel (Connecting Your Equipment) . . . . . . . . . . . . . . . . . . .
Installing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
3
3
4
4
4
5
5
5
5
7
7
7
7
7
8
8
9
9
9
9
9
10
10
10
10
11
11
Playing Audio Files (Audio Player) . . . . . . . . . . . . . . . . . . . . . . 12
Assigning Audio Files to Pads and Playing Them. . . . . . . . . . . . . .
Audio Player Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
13
13
13
15
15
16
16
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How the JUNO-DS Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing/Recording Patterns (PATTERN SEQUENCER). . . . . 13
Playing Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Operations for the Pattern Sequencer . . . . . . . . . . . . . . . . .
Recording Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving a Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pattern Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing the JUNO-DS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning On/Off the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing a Single Tone (Patch Mode). . . . . . . . . . . . . . . . . . . . . . . .
Performing Multiple Sounds Together (Performance Mode) . . . . .
Changing the Key Touch (KEY TOUCH) . . . . . . . . . . . . . . . . . . . . .
Shifting the Key Range in Semitone Steps (Transpose) . . . . . . . . .
Changing the Keyboard’s Pitch in One-Octave Steps
(Octave Shift) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Control Knobs to Vary the Sound . . . . . . . . . . . . . . . . .
Registering Favorite Sounds to a Button (FAVORITE) . . . . . . . . . .
Playing Arpeggios (ARPEGGIO) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performing with Voice from a Mic . . . . . . . . . . . . . . . . . . . . . . . . .
Overall Settings for the JUNO-DS . . . . . . . . . . . . . . . . . . . . . . 16
Accessing the Menu Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making System Settings (SYSTEM) . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the Display Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Enabling/Disabling the Auto-Off Function . . . . . . . . . . . . . . . . . . . 16
Master Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Applying Reverb to the Mic Input . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Assigning the Function of the Control Pedal. . . . . . . . . . . . . . . . . . 16
Assigning the Function of the Control Knobs . . . . . . . . . . . . . . . . . 17
Importing a Sample and Playing It on the Keyboard
(SAMPLE IMPORT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Importing Audio Files (Sample) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recalling a Sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting Imported Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Convenient Functions (UTILITY) . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing the Demo Songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
18
19
19
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Editing a Patch/Drum Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing a Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing the Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Your Settings (Write) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Shortcut List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Main Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing Rhythm Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting and Playing a Rhythm Pattern . . . . . . . . . . . . . . . . . . . .
Changing the Tempo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Owner’s Manual (this document)
Read this first. It explains the basic things you need to know in order to use the JUNO-DS.
PDF manual (download from the Web)
5 Parameter Guide (English)
This explains all parameters of the JUNO-DS.
5 MIDI Implementation (English)
This is detailed information about MIDI messages.
To obtain the PDF manual
1. Enter the following URL in your computer.
http://www.roland.com/manuals/
2. Choose “JUNO-DS” as the product name.
I
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT SAFELY” and Owner’s Manual (p. 20)). After reading, keep the document(s) including
those sections where it will be available for immediate reference.
© 2018 Roland Corporation
Panel Descriptions
Top Panel
1
2
3
4
5
6
7
Controller
Explanation
Page
Controller
Explanation
Changes a value.
* If you press one of these buttons while holding
down the other, the value changes more rapidly. If
you press one of these buttons while holding down
the [SHIFT] button, the value changes more greatly.
Move the cursor position up/down/left/right.
Accesses the corresponding edit screen when pressed
together with another button.
Exits a screen or cancels an operation.
Used to execute an operation.
Page
1 MODE
[SAMPLE IMPORT] button
[DAW CONTROL] button
Used to import an audio file (sample) into the JUNO-DS. p. 9
Used to control DAW software from the JUNO-DS.
For details, refer to “Parameter Guide (English)“ (PDF).
[–] [+] buttons
[H] [I] [K] [J] buttons
[SHIFT] button
[EXIT] button
[ENTER] button
p. 4
MEMO
You can move to the EDIT MENU screen by pressing the [SAMPLE IMPORT] button and [DAW
CONTROL] button simultaneously.
p. 4
p. 22
p. 4
2
Control knobs
[SELECT] button
[MIC IN] LEVEL slider
[PHRASE PAD] LEVEL slider
[LOWER] LEVEL slider
[UPPER] LEVEL slider
[VOCODER/AUTO PITCH]
button
Control the parameters that you’ve selected by the
[SELECT] button.
Selects the group of parameters that is controlled by
the Control knobs.
Adjusts the volume of the input from MIC INPUT jack.
Adjusts the volume of the rhythm pattern / audio
player.
Split: Adjusts the volume of the lower part.
Dual: Adjusts the volume of part 2.
Split: Adjusts the volume of the upper part.
Dual: Adjusts the volume of part 1.
Accesses settings for the Vocoder function and Auto
Pitch function.
Turns the split function on/off.
Turns the dual function on/off.
Turns the super layer function on/off.
Turns the arpeggiator on/off.
Used to change the touch response of the keyboard.
Depending on the KEY TOUCH setting, the [KEY TOUCH]
button is lit or unlit.
When this button is on (lit), the JUNO-DS is in
Performance mode. When this button is off (unlit), the
JUNO-DS is in Patch mode.
Hold down this button and use the OCTAVE [DOWN]
[UP] buttons to raise or lower the pitch range in
semitone steps.
Raise or lower the pitch range in steps of an octave.
When this button is on (lit), you can use the [0]–[9]
buttons to enter numeric values.
Turns the Favorite function on/off.
When this button is on (lit), you can use the [0]–[9]
buttons to select Favorite banks.
The indication changes depending on the remaining
battery amount.
Shows various information depending on operation.
Changes a value. If you hold down the [SHIFT] button
and turn the dial, the value changes more greatly.
Select categories (types) of sound (such as patches
or drum kits). You can also use the value dial to select
other sounds within the same category.
* When the [NUMERIC] button is on (lit), these buttons
operate as [0]–[9] buttons to enter numeric values.
Displays a menu screen.
Saves the modified settings in internal memory.
p. 7
p. 8
p. 11
p. 12
p. 6
5 PHRASE PAD
[TAP] button
[MUTE] button
[ERASE] button
[LOOP] button
Pads [1]–[8]
p. 8
[RHYTHM PATTERN] button
[PATTERN SEQUENCER] button
[AUDIO] button
p. 6
p. 8
p. 7
p. 16
p. 5
[t] button
p. 7
p. 7
[PATTERN LENGTH] button
[TEMPO] button
[MIXER] button
[u] button
[s] button
Sets the tempo to the interval at which you press thisp. 11
button during pattern playback.p. 13
When using the pattern sequencer, mutes the specified
p. 13
track.
When using the pattern sequencer, erases the recorded
p. 14
pattern or a portion of the pattern.
When using the pattern sequencer, turns loop playback/
p. 13
recording on/off.
Play back phrases (rhythm patterns / patterns / samples) that are
assigned to the pads.
Press this button to use rhythm patterns.p. 11
Press this button to use the pattern sequencer.p. 13
Press this button to use the “audio player” which plays
p. 12
back audio files from a USB flash drive.
Changes the number of measures in the pattern.p. 14
Adjusts the tempo.p. 11
When using the pattern sequencer, specifies settings
p. 13
such as level or pan for each track.
Moves to the beginning of the pattern or audio file.
p. 11
Starts/stops playback of the rhythm pattern, pattern,
p. 12
or audio file that is selected for the rhythm pattern
p. 13
function, the pattern sequencer, or the audio player.
When using the pattern sequencer, press this button to
p. 13
record a pattern.
Adjusts the volume that is output from the OUTPUT
jacks and the PHONES jack.
Varies the pitch or applies vibrato.
3 KEYBOARD
[SPLIT] button
[DUAL] button
[SUPER LAYER] button
[ARPEGGIO] button
[KEY TOUCH] button
[PATCH/PERFORM] button
[TRANSPOSE] button
OCTAVE [DOWN] [UP] buttons
6
[MASTER VOLUME] knob
p. 5
4
[NUMERIC] button
[FAVORITE] button
[BANK] button
BATTERY indicator
Display
Value dial
[DRUMS/PERCUSSION]–
[SAMPLE] (Category) buttons
([0]–[9] buttons)
[MENU] button
[WRITE] button
p. 4
p. 7
p. 3
7
Pitch bend/Modulation lever
p. 4
p. 5
p. 4
p. 16
p. 10
2
Panel Descriptions
Rear Panel (Connecting Your Equipment)
Microphone
External audio player
Amplified speakers
Headphones
MIDI device
* To prevent malfunction and equipment failure,
always turn down the volume, and turn off all the
units before making any connections.
8 9
10
11 12 13 14 15
16 17
18 19
20
Concerning the Auto Off Function
The power to this unit will be turned
off automatically after a predetermined
amount of time has passed since it was last
used for playing music, or its buttons or
controls were operated (Auto Off function).
If you do not want the power to be turned
off automatically, disengage the Auto Off
function (p. 16).
Power Cord
Pedal switch
Computer
Indicator
AC adaptor
AC Outlet
USB flash drive
NOTE
Expression pedal
* Place the AC adaptor so the side with the indicator (see
illustration) faces upwards and the side with textual
information faces downwards. The indicator will light when
you plug the AC adaptor into an AC outlet.
5 Any settings that you are in the process
of editing will be lost when the power
is turned off. If you have any settings
that you want to keep, you should save
them beforehand.
5 To restore power, turn the power on
again.
Jack/Controller
Explanation
You can connect an expression pedal (EV-5;
sold separately) or pedal switch (DP series; sold
separately) here and use them to control various
parameters or functions.
* Use only the specified expression pedal (EV-
5; sold separately). By connecting any other
expression pedals, you risk causing malfunction
and/or damage to the unit.
You can connect a pedal switch (DP series; sold
separately) and use it as a hold pedal.
For connecting a MIDI device.
Adjusts the input level of the MIC INPUT jack.
Connect your dynamic microphone here.
This is an unbalanced 1/4” phone jack.
Page
Installing Batteries
If eight commercially available AA nickel-metal hydride batteries are installed, you’ll
be able to play the JUNO-DS without connecting the AC adaptor.
8
PEDAL CONTROL jack
p. 16
1. Remove the battery compartment cover.
61-key model,
76-key model
88-key model
While pressing the tabs of the battery compartment cover on the bottom
panel, remove the cover.
Slide the top panel battery compartment cover, and detach the cover.
9
10
11
12
13
14
15
16
PEDAL HOLD jack
MIDI IN, OUT connectors
MIC [LEVEL] knob
MIC INPUT jack
EXT INPUT jack
OUTPUT R, L/MONO jacks
PHONES jack
* When turning the unit over, be careful so as to protect the buttons and knobs
from damage. Also, handle the unit carefully; do not drop it.
p. 8
2. Insert the batteries into the battery compartment, taking care to observe
the correct polarity.
Connect your external audio player or audio device here.
These output the audio signal in stereo to your amp or mixer.
If you’re outputting in mono, connect only the L/MONO jack.
Connect your headphones (sold separately) to this jack.
Use a commercially available USB 2.0 cable to connect this
unit to your computer.
You can synchronize it with a DAW on your computer via USB
MIDI, and record the sound of the JUNO-DS into your DAW
via USB audio.
Connect a USB flash drive (sold separately) here.
You can use a USB flash drive to play audio files or
to back up data.
p. 9
* Never insert or remove the USB flash drives
p. 12while this unit is turned on. Doing so may
p. 17corrupt the unit’s data or the data on the USB
flash drives.
* Carefully insert the USB flash drives all the way
in—until it is firmly in place.
Connect the included AC adaptor here.
* To prevent the inadvertent disruption of power to your
unit (should the plug be pulled out accidentally), and to
avoid applying undue stress to the jack, anchor the power
cord using the cord hook, as shown in the illustration.
This turns the power on/off.
Refer to “Ground Terminal” (p. 20).
p. 5
61-key model, 76-key model
88-key model
USB COMPUTER port
17
USB MEMORY port
3. Securely close the battery compartment cover.
NOTE
If you handle batteries improperly, you risk explosion and fluid leakage. Make
sure that you carefully observe all of the items related to batteries that are listed
in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaflet “USING THE UNIT
SAFELY” and Owner’s manual (p. 20)).
18
19
20
DC IN jack
[POWER] switch
Ground terminal
When to replace the batteries (BATTERY indicator)
When the batteries run down, the BATTERY indicator will light or blink.
5 The BATTERY indicator will light when the batteries run low.
5 If you continue using the JUNO-DS, the indicator will blink; please replace the
batteries.
NOTE
5 If you continue use even though the indicator is blinking, the display will
indicate “Battery Low!” and further operation will be impossible.
5 The BATTERY indicator is only an approximation.
3
Overview
How the JUNO-DS Is Organized
Controller section
The performance information generated when you press/release a key or press a hold
pedal are transmitted to the sound generator section.
This section consists of a keyboard, pitch bend/modulation lever, the panel buttons
and knobs, and pedals connected to the rear panel.
JUNO-DS
Sound Generator section
Patch
Performance
Drum Kit
Effects
MFX
Chorus
Reverb
Sound Generator section
This section receives performance information sent from the controller section, and
sounds a patch or performance accordingly.
Effects
MFX (Multi effects)
Chorus/Reverb
Provides 80 types of effect, such as distortion and flanger.
A chorus/reverb unit that can be used independently of the chorus/reverb
effects of the MFX unit.
Chorus can also be used as a delay.
Arpeggio
Phrase Pad
Rhythm Pattern
Pattern Sequencer
Audio Player
* MFX and chorus/reverb can have different settings for each patch and performance.
System
Phrase Pad
These play the phrases that are assigned to pads [1]–[8].
Rhythm Pattern
Pattern Sequencer
Audio Player
The pads play dedicated rhythm patterns.
The pads record patterns of several measures, and play them back while
you perform.
The pads play audio files from a USB flash drive.
Controller section
Keyboard
Pitch Bend/Modulation lever
Pedal
Patch
A patch is a sound that you can perform. Each patch consists of up to four “tones,” and
you can create a wide variety of sounds by combining tones.
Drum Kit
A drum kit is a collection of percussion instrument sounds or sound effects. Each
different key (note number) plays a different percussion instrument or sound effect.
Patch
Sample
These are sounds created by Sample Import (p. 9).
Tone 1
Tone 2
Tone 3
Tone 4
Performance
A performance lets you assign a different patch, drum kit, or sample to each of 16
parts, allowing you to use 16 different sounds simultaneously.
The following settings are also saved as performance settings.
SPLIT
DUAL
SUPER LAYER
Use different sounds for the right and left hands
Layer two sounds
Layer a single sound to create a richer feeling
Performance
Part 1
(Upper)
Part 2
(Lower)
Patch/Drum Kit/Sample
Patch/Drum Kit/Sample
Part 3
Patch/Drum Kit/Sample
When you select Split or Dual, the patches of part 1 and part 2 are used.
“Patch mode” is when you select and play a single patch (or drum kit or sample).
“Performance mode” is when you select and play a performance.
When using SPLIT/DUAL/SUPER LAYER, you’ll always be in Performance mode (the
[PATCH/PERFORM] button is lit).
Split
Part 16
Patch/Drum Kit/Sample
Dual
Super Layer
Basic Operation
Move the cursor
To change a selection or parameter setting that’s shown in the screen, use the [H] [I] [K] [J] buttons to
move the cursor to the value of the parameter that you want to change.
If you hold down a cursor button, the cursor continues to move.
If you hold down the cursor button of a certain direction and then press the cursor button of the
opposite direction, the cursor moves faster.
Change a value
Display the menu screen
Save your
settings
Change a
value
Changing a value
To change the value that’s highlighted by the cursor, use the value dial or the [–] [+] buttons.
5 If you hold down the [SHIFT] button while performing this operation, the value will change more
greatly.
5 In case of [–] [+] buttons, If you hold down one button and press the other button, the value will
change faster.
Entering numeric values
When the [NUMERIC] button is on (lit), you can use the [0]–[9] buttons to enter numeric values.
Press the [0]–[9] buttons to enter a numerical value, and then press the [ENTER] button.
Shortcut
Confirm/
execute
5 Exit a screen
5 Cancel an operation
[ENTER] button
Use this button to confirm a value or execute an operation.
[EXIT] button
Use this button to exit a screen or to cancel an operation without executing it.
[MENU] button
From the menu you can select detailed sound settings (editing), system settings, or utility functions.
Entering numeric values
Saving your settings
When you press the [WRITE] button, the WRITE MENU screen appears, allowing you to save a patch (drum
kit) or performance.
Shortcut
By holding down the [SHIFT] button and pressing another button, you can move to the setting screen
for the button you pressed.
For details, refer to “Shortcut List” (p. 22).
4
Playing the JUNO-DS
Turning On/Off the Power
Before turning the unit on/off, always be sure to turn the volume down. Even with
the volume turned down, you might hear some sound when switching the unit on/
off. However, this is normal and does not indicate a malfunction.
Patches are organized into categories which are assigned to buttons.
Each category is further divided into several sub-categories.
3. Use the value dial to select a patch.
MEMO
Patches whose category number is marked with an “S” (e.g., Pf: S01) are specially
recommended sounds.
1. Turn the power on in the following order:
this unit 0 connected devices.
* This unit is equipped with a protection
circuit. A brief interval (a few seconds) after
turning the unit on is required before it will
operate normally.
A screen like the following appears.
On
Off
Selecting a bank
1. Move the cursor to bank, and use the value dial to select a bank.
Bank
DS (DS Tone)
PRST (Preset)
GM (GM2)
Explanation
These are the particularly recommended patches of the JUNO-DS.
The edited result is saved in the user bank.
These patches cannot be rewritten. The edited result is saved in
the user bank.
This bank is for GM2 sounds.
This bank is for expansion sounds.
A wide range of tones from the Axial sound
library site can be added to this unit.
For details, refer to the Axial site.
http://axial.roland.com/
Patches, drum kits, or samples that you edit are saved in this
bank.
5 User patches can be saved in numbers 501–756.
5 User drum kits can be saved in numbers R501–R508.
* The explanations in this manual include illustrations that depict what should
typically be shown by the display. Note, however, that your unit may incorporate
a newer, enhanced version of the system (e.g., includes newer sounds), so
what you actually see in the display may not always match what appears in the
manual.
EXP
USER
2. Turn the [MASTER VOLUME] knob to adjust the volume.
Performing Multiple Sounds Together (Performance Mode)
1. Press the [PATCH/PERFORM] button to
Turning the Power Off
make it light.
1. Turn the power off in the following order: connected devices 0 this unit.
Playing a Single Tone (Patch Mode)
1. Make sure that the [PATCH/PERFORM]
button is unlit.
If the [PATCH/PERFORM] button is lit, press the
[PATCH/PERFORM] button to make it go dark.
The JUNO-DS is in Patch mode, and the PATCH
screen appears.
1
3
6
8
11
No.
1
2
3
4
5
6
Explanation
Effect on (lit)/off (unlit)
Tempo
Patch bank
Bank number
Sub category
Category number
No.
7
8
9
10
11
Explanation
Patch name
Octave Shift setting
Patch level
Level meter
Parameters that can currently be
adjusted by the control knobs
4
5
7
9
10
2
The JUNO-DS is in Performance mode, and the
PERFORM screen appears.
Performance bank/number
Split
Dual
Super Layer
16-part mode
2. Move the cursor to bank, and use the value dial to select a bank.
Bank
PRST (Preset)
USER
Explanation
These performances cannot be rewritten. The edited result is saved in the user
bank.
Performances that you edit are saved in this bank.
User performances can be saved in numbers 001–128.
3. Move the cursor to the performance number, and use the value dial to
select a performance.
5 If you select a performance that is set to split, dual, or super layer, the
corresponding button is lit.
5 Within Performance mode, the state in which neither split, dual, nor super layer
is selected is called “16-part mode”; this allows you to make more detailed
settings. For details, refer to “Parameter Guide (English)” (PDF).
2. Press a category button ([DRUMS/PERCUSSION]–[SAMPLE]) to select a
category.
When you edit the settings of a patch or performance, an “*” symbol appears
beside the name. If you want to keep the edited settings, perform the Write
operation (p. 10).
When you save the setting, the “*” disappears.
Category
DRUMS/PERCUSSION
PIANO
KEYBOARD/ORGAN
GUITAR/BASS
ORCHESTRA
WORLD
BRASS
VOCAL/PAD
SYNTH
SAMPLE
Explanation
Drum kit
Piano
Keyboard, Organ
Guitar, Bass
Orchestral
Ethnic instruments
Brass, Woodwinds
Vocal, Choir, Pads
Synthesizer
Sample (imported audio files)
5
Playing the JUNO-DS
Playing Different Tones with Your Right and Left Hands (SPLIT)
Adjusting the volume
You can use the [UPPER] LEVEL slider and [LOWER] LEVEL slider to adjust the upper
(part 1) and lower (part 2) volume (LEVEL). The “LEVEL” values in the screen change
accordingly.
1. Press the [SPLIT] button to make it light.
The Split screen appears.
1
3
4
8
5
No.
1
2
3
4
Explanation
Effect on (lit)/off (unlit)
Tempo
Performance bank
Performance number/name
Lower
(Part 2)
Category number
Patch name
Patch level
Level meter
7
8
Split point
* frame
Indicates the part whose patch will
be switched
6
Upper
(Part 1)
7
6
No.
Explanation
Category number
Patch name
Patch level
Level meter
2
Exchanging the upper/lower patches
1. Hold down the [SPLIT] button and press the [DUAL] button.
Switching patches
1. Press pad [1] or pad [2] to select the part whose patch you want to switch.
Pad [1]
Pad [2]
Upper (Part 1)
Lower (Part 2)
2. Use the value dial to switch patches.
You can also select patches by pressing the [DRUMS/PERCUSSION]–[SAMPLE]
buttons.
5
Thickening a Patch (SUPER LAYER)
You can overlay a patch several times, slightly shifting the pitches of each layer. This
is called “detuning.”
Using the “Super Layer” function, you can easily set the detuning and the number
of times you overlay the patch (number of parts), to create more spacious or thicker
tones.
Divided by the split point, the right-hand side of the keyboard plays the upper
(part 1) patch, and the left-hand side plays the lower (part 2) patch.
Adjusting the volume
You can use the [UPPER] LEVEL slider and [LOWER] LEVEL slider to adjust the upper
(part 1) and lower (part 2) volume (LEVEL). The “LEVEL” values in the screen change
accordingly.
1. Select a patch.
2. Press the [SUPER LAYER] button to make it
light.
The Super Layer screen appears.
1
3
5
6
7
10
No.
1
2
3
4
5
Explanation
Effect on (lit)/off (unlit)
Tempo
Performance bank
Performance number/name
Category number/Patch name
No.
6
7
8
9
10
Explanation
Layer
Detune
Part level
Level meter
Parameters that can currently be
adjusted by the control knobs
Number of layered parts
Amount of pitch shift
8
9
4
2
Exchanging the upper/lower patches
1. Hold down the [SPLIT] button and press the [DUAL] button.
Switching patches
1. Press pad [1] or pad [2] to select the part whose patch you want to switch.
Pad [1]
Pad [2]
Upper (Part 1)
Lower (Part 2)
2. Use the value dial to switch patches.
You can also select patches by pressing the [DRUMS/PERCUSSION]–[SAMPLE]
buttons.
Changing the Split point
1. Hold down the [SPLIT] button and press the key that you want to be the
new split point.
The key you press becomes the split point.
The split point key is included in the upper region.
3. Move the cursor to “Layer” or “Detune,” and use the value dial to change the
setting.
Layer
Detune
Parameter
Value
2–5
0–30
Playing Two Layered Sounds (DUAL)
1. Press the [DUAL] button to make it light.
The Dual screen appears.
1
3
5
6
No.
1
2
3
4
Explanation
Effect on (lit)/off (unlit)
Tempo
Performance bank
Performance number/name
Upper
(Part 1)
Category number
Patch name
Patch level
Level meter
7
6
Lower
(Part 2)
No.
Explanation
Category number
Patch name
Patch level
Level meter
4
7
2
Adjusting the volume
You can use the [UPPER] LEVEL slider to adjust the volume (LEVEL). The “LEVEL”
values in the screen change accordingly.
* frame
Indicates the part whose patch will
be switched
5
The upper (part 1) and lower (part 2) patches sound together.
6
Playing the JUNO-DS
Changing the Key Touch (KEY TOUCH)
Sets the keyboard’s touch.
Using the Control Knobs to Vary the Sound
You can use the Control knobs to
control the sound in real time.
You can control a total of 12
parameters, organized as three
groups each containing four
parameters.
If you select the parameters to be set
for each part, the target affected by
these modifications will depend on
the current settings.
1. Press the [KEY TOUCH] button.
The KEY TOUCH screen appears.
2. Move the cursor to “Velo Curve,” and use the value dial to change the
setting.
Value
LIGHT
MEDIUM
HEAVY
Explanation
This sets the keyboard to a light touch. You can achieve fortissimo (ff ) play with
a less forceful touch than MEDIUM setting, so the keyboard feels lighter. This
setting makes it easier for children, whose hands have less strength.
This sets the keyboard to the standard touch.
This sets the keyboard to a heavy touch. You have to play the keyboard more
forcefully than MEDIUM setting in order to play fortissimo (ff ), so the keyboard
touch feels heavier. This setting allows you to add more expression when
playing dynamically.
Patch mode
Drum Kit
Control knobs will apply to each individual key. When you turn one of
these knobs, the currently selected key will be indicated (e.g., C4).
To change the key to which the effect is to be applied, press a key and
specify a new key name.
Performance mode
Dual, Super Layer
Split, 16-part mode
All parts
The currently selected part
* For some sounds, the knobs may not have an effect.
MEMO
You can also make more detailed adjustments to the keyboard touch, or specify
that all notes sound at a fixed volume regardless of your keyboard playing
dynamics. For details, refer to system settings “KEY TOUCH” (p. 16).
1. Press the [SELECT] button to select the group of parameters.
2. Use the control knobs to control the parameters.
Parameter
CUTOFF
Explanation
Adjusts the frequency (cutoff frequency) at which the filter begins to be
applied.
Boosts the sound in the vicinity of the cutoff frequency, adding a
distinctive character to the sound.
Adjusts the time from when you press the key until the sound reaches
the maximum level.
Adjusts the time from when you release the key until the sound is no
longer heard.
Adjusts the reverb that’s applied to the input sound from the MIC IN jack.
Controls MFX.
Adjusts the amount of chorus or delay.
Adjusts the amount of reverb.
You can assign various parameters to these knobs and control them.
For details on how to change the parameters that are assigned to the
knobs, refer to “Parameter Guide (English)” (PDF).
Shifting the Key Range in Semitone Steps (Transpose)
1. Hold down the [TRANSPOSE] button,
and press the OCTAVE [DOWN] or
[UP] buttons.
If a value other than “C” is set, the
[TRANSPOSE] button is lit.
To reset the value to “C,” hold down
the [TRANSPOSE] button and press
the OCTAVE [DOWN] and [UP] buttons
simultaneously.
RESONANCE
ATTACK
RELEASE
MIC REVERB
MFX CTRL
CHORUS/DELAY
REVERB
ASSIGN 1–4
Value
-5 (G)–0 (C)–+6 (F#)
Registering Favorite Sounds to a Button (FAVORITE)
“Favorites” store settings for frequently used patches and performances, allowing
you to recall them by simply pressing a button.
Favorites store the number of the patch or performance.
Changing the Keyboard’s Pitch in One-Octave Steps
(Octave Shift)
1. Press the OCTAVE [DOWN] or [UP] button.
If this setting is other than “0,” OCTAVE [DOWN] or
[UP] button will light.
You can reset this setting to “0” by pressing
OCTAVE [DOWN] and [UP] buttons simultaneously.
Favorite Bank 9
Favorite Bank 0
Favorite 0–9
5 Favorites 0–9 can be registered as a “favorite set”; you can register a total of ten
such sets.
5 Use the [0] to [9] buttons to register tones or switch to tones.
NOTE
Value
-3–0–+3
If you’ve changed the sound or keyboard settings (split, dual, super layer), you
must first save the changed settings before you can register them as a favorite.
What’s affected by the Octave Shift setting will depend on the current mode.
Registering a Favorite
Patch mode
The octave of the selected patch will change. The setting cannot be saved.
1. Select a patch or performance that you want to
register.
Performance mode
Dual, Super Layer
Split, 16-part mode
The octave of all parts will change.
The octave of the currently selected part will change.
You can set this independently for each part.
2. Press the [BANK] button to make it light.
3. Press a [0]–[9] button to select the bank in which
you want to register the favorite.
4. Hold down the [FAVORITE] button and press a
* You can save the Octave setting of each part by saving the performance.
[0]–[9] buttons to select the number in which the
favorite will be registered.
7
Playing the JUNO-DS
Recalling a Favorite
Editing Arpeggios
1. Press the [FAVORITE] button to make it light.
2. Press the [0]–[9] button to select a favorite.
Switching Favorite Banks
1. Press the [ARPEGGIO] button to make it light.
The ARPEGGIO screen appears.
2. Move the cursor to the item that you want to edit, and use the value dial to
edit the setting.
1. Press the [BANK] button to make it light.
2. Press the [0]–[9] button to select a bank.
Viewing or Removing a Favorite
3. Press the [EXIT] button to exit the ARPEGGIO screen.
MEMO
For details on the parameters that you can edit in the ARPEGGIO screen, refer to
“Parameter Guide (English)” (PDF).
The button from [0] to [9] that corresponds to the currently selected bank blinks.
1. Hold down the [SHIFT] button and press the [FAVORITE] button.
The FAVORITE UTILITY screen appears.
Performing with Voice from a Mic
You can input a voice from a mic connected to the rear panel MIC IN jack, and
perform using a voice.
Microphone
You can perform the following operations in the FAVORITE UTILITY screen.
Controller
[K] [J] buttons
[H] [I] buttons
[ENTER] button
Explanation
Switch the favorite bank.
Select a favorite.
Removes the selected favorite.
When a confirmation screen appears, press the [ENTER] button once
again.
If you decide not to remove it, press the [EXIT] button.
2. Press the [EXIT] button to exit the FAVORITE UTILITY screen.
Playing Arpeggios (ARPEGGIO)
The arpeggiator is a function that automatically produces an arpeggio based on the
keys that you press.
* The arpeggio settings cannot be saved.
5 To adjust the input volume from the mic, use the rear panel MIC [LEVEL] knob.
Adjust the knob so that the sound from the mic is not distorted.
5 To adjust the volume balance between the mic sound and your performance,
use the top panel [MIC IN] level slider.
Using the Vocoder/Auto Pitch
A “vocoder” is an effect that is typically applied to a human voice. By sending
a human voice through a vocoder, you can give it an unexpressive robot-like
character. The pitch is controlled by playing the keyboard.
“Auto Pitch” sounds suppress pitch irregularity, producing a pitch-corrected sound.
By applying a stair-step constraint to pitch change, this creates a mechanical effect.
5 The preset bank (PRST) contains 10 vocoder settings and 10 auto-pitch settings.
1. Press the [ARPEGGIO] button to make it light.
The ARPEGGIO screen appears.
1. Press the [VOCODER/AUTO PITCH] button to make it
light.
The VOCODER/AUTO-PITCH screen appears.
2. Play a chord on the keyboard.
MEMO
An arpeggio consisting of the notes you hold down starts playing.
5 If “Arp Hold” is “ON,” the arpeggio continues playing even after you release the
keyboard.
5 If you hold down the [SHIFT] button and press the [ARPEGGIO] button, the
ARPEGGIO screen appears with Arp Hold turned on.
2. Move the cursor to bank, and use the value dial to select a “PRST” or “USER.”
3. Move the cursor to the number, and use the value dial to select a vocoder
or auto-pitch setting.
PRST
001–010
011–020
501–520
Vocoder settings
Auto-pitch settings
User bank
3. To turn off this function, press the [ARPEGGIO] button once again to make it
go dark.
USER
Select an Arpeggio Style
4. While playing the keyboard, vocalize into the microphone.
If you’ve selected an Auto Pitch, there’s no need to play the keyboard.
1. Press the [ARPEGGIO] button to make it light.
The ARPEGGIO screen appears.
Value
001–128
5. To turn off this function, press the [VOCODER/AUTO PITCH] button once
again to make it go dark.
2. Move the cursor to “STYLE,” and use the value dial to select a style.
MEMO
You can make detailed adjustments to the vocoder or auto-pitch settings. For
details, refer to “Parameter Guide (English)” (PDF).
8
Importing a Sample and Playing It on the Keyboard (SAMPLE IMPORT)
Audio files that you’ve imported from a USB flash drive into the JUNO-DS (referred to as “samples”) can be assigned to the keyboard and played.
In Performance mode, you can assign up to 16 audio files (16 parts).
NOTE
For an audio file to be imported, it must be a WAV format, 44.1 kHz, 16 bit file. If any other file is selected, the display indicates “Incorrect File!” and the file cannot be imported.
Copy to a USB flash drive
Insert USB flash drive
WAV
Importing Audio Files (Sample)
1. Use the JUNO-DS to format the USB
flash drive (p. 17).
Recalling a Sample
1. Press the [SAMPLE] button.
2. Use the value dial to select a patch.
* The pitch cannot be changed if the pitch is more than two octaves above the
specified Original Key.
2. Power-off the JUNO-DS, and then
remove the USB flash drive.
IMPORT folder
01.wav
02.wav
03.wav
04.wav
05.wav
06.wav
07.wav
3. Using your computer, copy
the desired audio files into the
“IMPORT” folder.
* Use only single-byte alphanumeric
characters in the folder names and
file names.
Deleting Imported Samples
1. Press the [SAMPLE IMPORT] button.
The SAMPLE MENU screen appears.
2. Move the cursor to “SAMPLE DELETE,” and press the [ENTER] button.
The SAMPLE DELETE screen appears.
4. Insert the USB flash drive into the
JUNO-DS, and turn on the power.
The SAMPLE MENU screen appears.
5. Press the [SAMPLE IMPORT] button.
6. Move the cursor to “SAMPLE IMPORT,” and press the [ENTER] button.
The SAMPLE IMPORT screen appears.
3. Select the sample (patch) that you want to delete.
4. Move the cursor to “DELETE,” and press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
5. Press the [ENTER] button to delete a sample.
MEMO
5 Some or all notes of performances that use the deleted sample will no longer
sound.
5 It’s a good idea to back up important data to a USB flash drive or to your
computer (p. 18).
7. Make settings to specify how the file is imported.
Import File
Original Key
Loop Switch
To:
Imported audio file
Specifies the note number that plays the sample at the pitch at which it was
imported.
Turns loop playback on/off.
Save-destination number of the sample.
Sample is saved in the JUNO-DS’s internal user memory, and is assigned a
number starting with 501.
Editing Samples
1. Press the [SAMPLE IMPORT] button.
The SAMPLE MENU screen appears.
The SAMPLE EDIT screen appears.
2. Move the cursor to “SAMPLE EDIT” and press the [ENTER] button.
3. Move the cursor to tab, and use the [K] [J] buttons to switch the pages.
4. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
MEMO
5 The sound is automatically assigned to the keyboard with the appropriate
pitches, starting from two octaves above the Original Key and extending
downward to the lowest note of the keyboard.
5 You can change the loop point and original key of the sample later. For details,
refer to “Parameter Guide (English)” (PDF).
MEMO
You can make detailed settings for the sample, such as the sample’s loop point
and original key. For details, refer to “Parameter Guide (English)” (PDF).
8. Move the cursor to “IMPORT,” and press the [ENTER] button.
The audio file is imported.
* If user memory is full, the screen indicate “Memory Full!” and you can’t import the
audio file. In this case, you’ll need to delete unnecessary samples.
5. To save the edited settings, perform the operation “Saving Your Settings
(Write)” (p. 10).
9. Repeat steps 7–8 to import the desired files into the JUNO-DS.
MEMO
5 An imported audio file can be used as a single patch by pressing the [SAMPLE]
button.
5 If the file size is large, the import may require several minutes.
NOTE
Never turn off the power while the screen indicates “Processing....”
9
Editing Sounds
MEMO
For details on the parameters that you can edit, refer to “Parameter Guide (English)” (PDF).
Editing a Patch/Drum Kit
1. Select a patch or drum kit that you want to edit.
2. Press the [SAMPLE IMPORT] button and [DAW CONTROL] button
simultaneously.
The EDIT MENU screen appears.
Saving Your Settings (Write)
If ou turn the power off or select another tone, the changed settings are lost.
If you want to keep the changes you made, perform the Write operation.
NOTE
When you save, the data that was previously in the save-destination is
overwritten.
1. Press the [WRITE] button to make it light.
The WRITE MENU screen appears.
3. Move the cursor to “PATCH EDIT” or “DRUM KIT EDIT,” and press the [ENTER]
button.
The PATCH EDIT or DRUM KIT EDIT screen appears.
4. Move the cursor to tab, and use the [K] [J] buttons to switch the pages.
5. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
(Write).”
6. To save the edited settings, perform the operation “Saving Your Settings
Editing a Performance
1. Press the [PATCH/PERFORM] button to make it light.
2. Select a performance that you want to edit.
3. Press the [SAMPLE IMPORT] button and [DAW CONTROL] button
simultaneously.
The EDIT MENU screen appears.
5 In Patch mode, you can long-press the [WRITE] button to access the name input
screen.
5 Depending on the state before you pressed the button, either PATCH WRITE or
PERFORMANCE WRITE is automatically selected.
NOTE
In Performance mode, if an “*” symbol is shown for both Patch and Performance,
first save the patch and then save the performance. Be aware that if you save the
performance first, the edited patch data is lost.
2. Press the [ENTER] button.
The name input screen appears.
4. Move the cursor to “PERFORMANCE EDIT” or “PART EDIT,” and press the
[ENTER] button.
The PERFORM EDIT or PART EDIT screen appears.
MEMO
“PERFORMANCE EDIT” lets you edit while viewing a list of the settings of all parts,
and “PART EDIT” lets you edit each part of the performance individually.
* PERFORMANCE EDIT and PART EDIT have the same parameters in common.
3. Assign a name to the data that you’re saving.
Operation
[K] [J] buttons
Value dial, [–] [+] buttons
[I] [H] buttons
Explanation
Move the cursor.
Select the character.
Switch between uppercase and lowercase.
5. Move the cursor to tab, and use the [K] [J] buttons to switch the pages.
6. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
(Write).”
7. To save the edited settings, perform the operation “Saving Your Settings
Editing the Effects
You can make different effect settings independently for Patch mode and
Performance mode.
Inserting/ Deleting Characters
1. While entering a name, press the [MENU] button.
The NAME MENU window appears. The window closes if you press the button
once again.
Explanation
Press the [ENTER] button to insert a space (blank) at the cursor location.
Press the [ENTER] button to delete the character at the cursor location;
subsequent characters will be moved forward to fill the gap.
2. Move the cursor to “INSERT” or “DELETE,” and press the [ENTER] button.
Function
INSERT
DELETE
Patch mode
You can use multi-effect (MFX), chorus, and reverb for each patch.
Performance mode
For each setting, you can use a maximum of three multi-effects (MFX1, MFX2,
MFX3), one chorus, and one reverb.
For each of the three MFX, the chorus, and the reverb, you can specify whether it
will operate according to the effect settings of the performance, or according to the
effect settings of the patch or drum kit assigned to the part you specify.
4. When you’ve specified the name, press the [ENTER] button.
5. Use the value dial to specify the save-destination.
6. Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
1. Press the [SAMPLE IMPORT] button and [DAW CONTROL] button
simultaneously.
The EDIT MENU screen appears.
7. Press the [ENTER] button to save the settings.
NOTE
Never turn off the power while the screen indicates “Writing....”
2. Move the cursor to “EFFECTS EDIT,” and press the [ENTER] button.
The EFFECTS EDIT screen appears.
3. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
(Write).”
4. To save the edited settings, perform the operation “Saving Your Settings
MEMO
When you edit the effect settings, an “*” is shown by the patch/performance
name. When you save the patch or performance, the “*” disappears.
10
Playing Rhythm Patterns
A rhythm pattern is a fixed phrase played by rhythm instruments such as drums or percussion. The JUNO-DS can play back rhythm patterns assigned to pads [1]–[8] while you
use the keyboard to perform along with the rhythm patterns.
A rhythm pattern consists of eight “variations,” and the eight variations are collective called a “rhythm pattern group.”
When you select a rhythm pattern group, the variations are automatically assigned to pads [1]–[8].
Rhythm Pattern Group
Variation 5
Variation 6
Variation 7
Variation 8
Variation 1
Variation 2
Variation 3
Variation 4
Selecting and Playing a Rhythm Pattern
1. Press the [RHYTHM PATTERN] button to make it light.
The RHYTHM PATTERN screen appears.
Changing the Tempo
1. Press the [TEMPO] button
The TEMPO screen appears.
2. Make settings for the rhythm pattern.
Parameter
Value
Explanation
Selects the rhythm pattern group. Changing the rhythm pattern group will
also change the rhythm patterns that are assigned to pads [1]–[8].
* You can move the cursor to this parameter, press the [ENTER] button,
and select a rhythm pattern from the RHYTHM PATTERN GROUP LIST
screen.
* For more about rhythm pattern groups, refer to “Parameter Guide
(English)” (PDF).
001–030
Selects the drum kit that is used to play the rhythm patterns.
Switching the rhythm pattern group will switch the drum kit that is
assigned by the rhythm pattern group, but you can use this parameter to
select a different drum kit if you want.
* You can move the cursor to this parameter, press the [ENTER] button,
and select a drum kit from the DRUM KIT LIST screen.
Dr: 001–
Specifies the volume of the rhythm pattern.
1–127
2. Use the value dial to adjust the tempo.
3. Press the [EXIT] button to return to the previous screen.
MEMO
In the TEMPO screen you can also edit the following parameters.
5 Metronome (p. 17) on/off
5 Tempo Lock (p. 17) on/off
Group
Drum Kit
Level
NOTE
The rhythm pattern settings cannot be saved.
3. Press the pad [1]–[8] buttons to play rhythm patterns.
The pattern assigned to the button you pressed plays, and the pad blinks.
Press the pad once again to stop (the pad is lit).
Other Operations
Controller
[s] button
[TAP] button
[TEMPO] button
[PHRASE PAD] LEVEL slider
Explanation
Plays the variation selected by the pad you pressed. Press this
button once again to stop.
Specifies the tempo as the interval at which this button is
repeatedly pressed.
Changes the tempo.
Adjusts the volume of the rhythm pattern.
11
Playing Audio Files (Audio Player)
Audio files saved on a USB flash drive can be assigned to pads [1]–[8] and played
back.
8. Press the [ENTER] button.
Audio files that can be played
MP3
Format
Sampling Frequency
Bit Rate
WAV/AIFF
Sampling Frequency
Bit
MPEG-1 audio layer 3
44.1 kHz
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps, VBR
(Variable Bit Rate)
44.1 kHz
8, 16, 24-bit
The audio files in the selected folder are automatically assigned to the pads in
descending order. For example if you choose the SONG1 folder, the files are
assigned as shown in the illustration.
MEMO
The files inside the folder are shown in alpha-numeric order, and the first eight
files are assigned.
05.wav
06.wav
07.wav
08.wav
NOTE
5 Two or more audio files can’t be played simultaneously.
5 The tempo of an audio file can’t be changed.
01.wav
02.wav
03.wav
04.wav
Assigning Audio Files to Pads and Playing Them
MEMO
If there are audio files in the root directory of the USB flash drive when you turn
on the power, they will automatically be assigned to the pads.
9. Press one of the Pad [1]–[8].
1. Format your USB flash drive on the
JUNO-DS (p. 17).
SONG LIST folder
SONG1
01.wav
02.wav
03.wav
04.wav
05.wav
06.wav
07.wav
08.wav
SONG2
001.mp3
002.mp3
003.mp3
004.aif
005.aif
The pad you pressed blinks, and the assigned audio file plays.
Press the pad once again to stop playback (the pad is lit).
2. Power-off the JUNO-DS, and
Audio Player Operations
Action
Play back
Operation/Explanation
Press one of the Pad [1]–[8].
Press a currently-playing pad.
StopTo resume playback from the location at which you stopped, hold
down the [AUDIO] button and press the same pad.
Move to the beginning Hold down the [SHIFT] button and press Pad [1].
RewindHold down the [SHIFT] button and hold down Pad [2].
Fast-forwardHold down the [SHIFT] button and hold down Pad [3].
Press the [LOOP] button.
Loop settings (*1)Looping is enabled for the currently selected pad.
The [LOOP] button lights.
Setting the Start point:
While the file plays, hold down the [SHIFT] button and press the
[LOOP] button.
Setting the End point:
Once again, hold down the [SHIFT] button and press the [LOOP]
button.
Start point
Loop a region of the
file
Audio file
Loop region
When the End Point is set, playback repeats over the Start–End region
that you specified.
If a file with a specified loop region is played from the beginning,
it will play until the End point and then start looping over the loop
region.
* If, after specifying the loop region, you want to change the setting
so that the entire file loops, hold down the [LOOP] button and
press the pad whose setting you want to change.
Adjusting the Start
point or End point (*1)
Move the cursor to “Start” or “End,” and use the value dial to change
the setting.
To switch immediately:
Press one of the Pad [1]–[8].
To switch after playback has ended:
Hold down the currently-playing pad, and press the pad that you
want to play next.
Move the [PHRASE PAD] LEVEL slider.
End point
disconnect the USB flash drive.
3. Using your computer, create a
folder inside the “SONG LIST” folder.
* Use only single-byte alphanumeric
characters in folder names.
4. Copy the desired audio files into
the folder that you created.
5. Connect the USB flash drive to the
JUNO-DS, and turn on the power.
6. Press the [AUDIO] button.
The AUDIO PLAYER screen appears.
7. Make settings for the audio player.
Parameter
Song List
Value/Explanation
Displays the folders that are in the SONG LIST folder of the USB flash drive.
* Move the cursor to this parameter, and press the [ENTER] button to see
the SONG LIST screen which lists the folders.
Specifies the volume of the audio files.
* The Level setting is lost when you turn off the power. If you want the
setting to be remembered even after the power is turned off, specify
the desired value in the system setting “Audio Level” (p. 16).
0–127
Shows the audio files that are assigned to the pads.
Turns loop playback on/off.
OFF, ON
Specifies the start position for loop playback.
0–(available position range)
Specifies the end position for loop playback.
(available position range)–end
Audio Level
Playing the next pad
PAD1–8
Name
Loop
Start
End
Adjusting the volume
of the Audio Player
*1:
Loop settings for each audio file are automatically saved in the SONG LIST folder. If you
move an audio file to a different folder, the loop settings will be preserved by moving the
settings file (.bin) as well.
NOTE
Loop settings can’t be made for an MP3 file. If you want to make loop settings, use
your computer to convert the file to a WAV or AIFF file before you import it.
12
Playing/Recording Patterns (PATTERN SEQUENCER)
The pattern sequencer is a function that lets you record your keyboard performance
and knob movements, and then play them back repeatedly. The recorded data is
called a “pattern,” and you can record and save patterns of up to eight measures.
5 A pattern consists of tracks 1–8, and recording occurs on the currently selected
track.
5 The patterns are organized into 32 preset patterns (PRST) and 128 user patterns
(USER), and are saved in a “pattern bank.”
Muting a specific track (Track Mute)
Use this function to mute specific tracks when a pattern is playing.
1. Press the [MUTE] button to make it light.
Now the pads are in mute setting mode.
2. Press pads [1]–[8] to select the track(s) that you want to mute.
You can press multiple pads.
The pad you pressed blinks, and its track is muted.
To cancel muting, press the blinking pad.
Pattern Bank
USER001–128
User Pattern
PRST001–032
3. Press the [MUTE] button to make it go dark.
Preset Pattern
Track 5
Track 6
Track 7
Track 8
(Rhythm)
The pad mute setting mode is cancelled.
* Track muting is maintained even after you cancel pad mute setting mode.
Basic Operations for the Pattern Sequencer
Operations for the pattern sequencer are valid only when the [PATTERN SEQUENCER]
button is lit.
Controller
[s] button
[u] button
Explanation
Plays/stops the pattern.
Returns the pattern to the beginning.
Creates a pattern by recording your keyboard performance and
controller operations in real time.
Sets the tempo to the interval at which you press this button
repeatedly.
If this is on, you can use pads [1]–[8] to mute the specified track(s).
Erases a recorded pattern or a portion of the pattern.
5 If this is on, the pattern loops between the specified
measures.
5 If this is off, the pattern plays/records to the specified
measure, and then stops.
Selects tracks. You can use the keyboard to play or record the
selected track.
Changes the number of measures in the pattern. You can create
a pattern of up to eight measures.
Changes the tempo.
Lets you specify the volume and pan of each track.
Track 1
Track 2
Track 3
Track 4
[t] button
[TAP] button
[MUTE] button
[ERASE] button
Playing Patterns
Playing the currently selected pattern
[LOOP] button
Pads [1]–[8]
[PATTERN LENGTH] button
[TEMPO] button
[MIXER] button
1. With the [PATTERN SEQUENCER] button lit, press the [s] button.
Press the button once again to stop.
Selecting and playing a pattern
1. Press the [PATTERN SEQUENCER] button to make it light.
The PATTERN SEQUENCER screen appears.
1
3
2
4
Recording Patterns
1. Press the [PATTERN SEQUENCER] button to make it light.
The PATTERN SEQUENCER screen appears.
5
6
7
No.
Explanation
Status indication
5 Now Recording
5 Now Playing
5 Rec Standby
5 Stop
Tempo
Pattern bank (PRST/USER)
Pattern number, Pattern name
Selected track
Patch that is used to play/record the
selected track
Category number, Patch name
7
No.
Explanation
Playback/recording progress
indication
This indicates the playback/recording
position as Measure: Beat: Tick units
and as a bar graph.
Number of measures
(maximum 8)
White exterior frame:
Measures specified by PATTERN
LENGTH
Gray exterior frame:
Measures not specified by PATTERN
LENGTH
2. Select the pattern that you want to record.
When making a new recording
If you want to make a new recording but continue using the sound settings that are
currently selected for each track, use the PATTERN ERASE function (p. 14) to clear
the contents of the pattern before you continue.
If you want to initialize the sound settings as well as the recorded contents, initialize
the pattern (p. 15).
1
2
3
4
5
6
3. Press the [t] button.
The [t] button blinks, and the JUNO-DS is in record-ready mode.
Parameter
Value/Explanation
Specifies how the rhythm pattern will be recorded.
* This can be specified only if an empty pattern is selected.
OFFA rhythm pattern will not be recorded.
Only on the first cycle of recording, the performance of the
ON
selected rhythm pattern is recorded on track 8.
Specifies the time signature of the pattern.
* This can be specified only if an empty pattern is selected.
(1–32) / (2, 4, 8, 16)
Selects the way in which recording is started.
Recording begins immediately when you press the [s]
OFF
button.
When you press the [s] button, a count begins from
1 MEASone measure before the recording start location; recording
begins when the recording start location is reached.
When you press the [s] button, a count begins from two
2 MEASmeasures before the recording start location; recording
begins when the recording start location is reached.
Recording begins when you press the [s] button, or
WAIT NOTE
when you press a key or press the hold pedal.
4. Make settings for the pattern that you want to record.
2. Move the cursor to the pattern bank, and use the value dial to select a “PRST”
or “USER.”
R. Ptn 1st Loop
Rec
3. Move the cursor to the pattern number, and use the value dial to select the
pattern that you want to play.
MEMO
You can move the cursor to the pattern number, press the [ENTER] button, and
select a pattern from the PATTERN LIST screen that appears.
Beat
4. Press the [s] button to play the pattern.
Press the button once again to stop.
Count In
13
Playing/Recording Patterns (PATTERN SEQUENCER)
Parameter
Value/Explanation
Specifies whether quantize will be applied during recording.
* Quantize:
Automatically corrects inaccuracies in the timing of your keyboard
playing, so that the timing is more accurate.
OFFQuantize is not applied during recording.
ONQuantize while recording.
Specifies the note timing value at which quantization is applied.
1/32 (`)–1/4 (¸)
Specifies the degree to which your notes are moved to precise intervals of
the note values specified by the Resolution setting.
If this is set to “100%,” the notes that you record are moved
all the way to exact intervals of the specified Resolution.
0–100%
With lower percentages, less correction is applied. If this is
set to “0%,” the timing is not corrected at all.
MEMO
5 By holding down the [SHIFT] button and pressing the [LOOP] button you can
turn LOOP REC on/off.
OFF
ON
Record to the specified measure length, and then switch from recording to
playback.
Continue recording even after recording to the specified measure length.
Input Quantize
Resolution
Strength
5 If the [LOOP] button is on and R. Ptn 1st Loop Rec is ON, the rhythm pattern is
also recorded only for the first cycle. For the second and subsequent cycles, the
rhythm pattern stops, and track 8 on which the rhythm pattern was recorded
will play.
5 Recording adds to the previously recorded data, and layers new data. If you
want to re-record, erase the data and record again.
9. Press the [t] button.
5. Make various settings as necessary.
To change the number of measures in the pattern
Refer to “Specifying the number of measures in the pattern (PATTERN LENGTH)”
(p. 14).
When recording a rhythm pattern
If R. Ptn 1st Loop Rec is ON, the rhythm pattern playback is recorded on the first
cycle after recording starts.
You return to pattern playback. If you press the [t] button once again, you return to
recording mode.
The pattern stops regardless of the recording/playback state.
10. Press the [s] button to stop the pattern.
Erasing a portion of the track data during recording/playback
1. During recording or playback, press the [ERASE] button.
1. Press the [RHYTHM PATTERN] button.
The RHYTHM PATTERN screen appears.
As long as you continue holding down the button, the performance data of the
selected track is erased from the pattern.
Erasing an entire pattern or track (PATTERN ERASE)
2. Select a rhythm pattern group and drum kit.
3. Use pads [1]–[8] to select the rhythm pattern.
When you press a pad, the rhythm pattern plays.
1. Hold down the [SHIFT] button and press the [ERASE] button.
The PATTERN ERASE screen appears.
Value
Track 1–8
SysEx
ALL
Explanation
The data of the specified track is erased.
System exclusive messages are erased.
The data of all tracks are erased.
2. Select the track that you want to erase, and press the [ENTER] button.
4. Press the [EXIT] button to exit the RHYTHM PATTERN screen.
Changing the recording tempo
1. Press the [TEMPO] button.
The TEMPO screen appears.
Specifying the number of measures in the pattern (PATTERN LENGTH)
2. Use the value dial to specify a tempo at which you are comfortable recording.
3. Press the [EXIT] button to exit the TEMPO screen.
* Tempo change data is not recorded.
1. Press the [PATTERN LENGTH] button.
The PATTERN LENGTH screen appears.
2. Select the number of measures, and press the [ENTER] button.
If the number of measures is increased
The screen asks “With Copying?”
Operation
Explanation
The recorded data is copied repeatedly to increase the number of measures.
Only the number of measures is increased; the recorded data is unchanged.
“YES”
“NO”
MEMO
You can set the tempo by repeatedly pressing the [TAP] button at the desired
interval.
To sound the metronome
1. Press the [TEMPO] button.
The TEMPO screen appears.
2. Move the cursor to “Metronome,” and use the value dial to set “ON.”
3. Use the value dial to specify a tempo at which you are comfortable recording.
4. Press the [EXIT] button to exit the TEMPO screen.
MEMO
You can turn the metronome on/off by holding down the [SHIFT] button and
press the [TEMPO] button.
If the number of measures is decreased
The recorded data is unchanged; only the number of measures played back is
changed.
6. Use pads [1]–[8] to specify the recording track.
The selected pad is lit.
Lit other than the recording track:
Unlit:
A track that already contains data
A track that does not contain data
To change the sound of the recording track
1. Move the cursor to the category number.
The PATCH LIST screen appears.
2. Use the value dial to select a patch.
You can also use the category buttons ([DRUMS/PERCUSSION]–[SAMPLE]) to
make a selection.
7. Press the [s] button to start recording.
8. Play the keyboard.
Movements of the knobs and pitch bend/modulation are also recorded.
14
Playing/Recording Patterns (PATTERN SEQUENCER)
Saving a Pattern
A pattern that you create will be lost if you select a different pattern or if you power-
off the JUNO-DS.
When you’ve created a pattern that you like, you should save it.
Initializing a Pattern (PATTERN INIT)
1. In the PATTERN UTILITY screen, select “PATTERN INIT” and press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
1. While the PATTERN SEQUENCER screen is shown, press the [WRITE] button.
The PATTERN NAME screen appears.
2. Press the [ENTER] button to initialize the pattern.
Importing Pattern Data from SMF (SMF IMPORT)
Imports the specified SMF into the temporary area.
* Bank select and program change data is not imported.
5 When you import, the current state of the temporary area is discarded.
5 The SMF that you want to import must be saved in the IMPORT folder of the USB
flash drive.
2. Enter the pattern name.
MEMO
For more about entering a name, refer to “Saving Your Settings (Write)” (p. 10).
SMF data that can be imported:
3. When you’ve specified the pattern name, press the [ENTER] button.
The PATTERN WRITE screen appears.
4. Use the value dial to select the save-destination.
NOTE
If you save to a number that already contains data, the pattern is overwritten and
the previous data is erased.
5 Only SMF format 0 is supported.
5 Only the tracks (parts) used by the JUNO-DS are imported.
5 The first eight measures of SMF data can be imported. Subsequent data is not
imported.
1. In the PATTERN UTILITY screen, select “SMF IMPORT” and press the [ENTER]
button.
The SMF IMPORT screen appears.
5. Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
2. Select the SMF that you want to import.
MEMO
In the SMF IMPORT screen, you can press the [s] button to audition the
selected SMF.
6. Press the [ENTER] button to save the pattern.
NOTE
Saving is complete when the screen indicates “Completed!”
Never turn off the power while the screen indicates “Writing....”
3. Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Press the [ENTER] button to import the SMF.
Exporting a Pattern to SMF (SMF EXPORT)
A pattern in the temporary area can be given a name and exported as SMF data.
5 Preset patterns cannot be exported.
5 The exported SMF is saved in the “EXPORT” folder of the USB flash drive.
Pattern Utility
1. While the PATTERN SEQUENCER screen is shown, press the [MENU] button.
The MENU screen appears.
2. Move the cursor to category number, and press the [ENTER] button.
The PATTERN UTILITY screen appears.
MEMO
While the PATTERN SEQUENCER screen is shown, you can hold down the [SHIFT]
button and press the [PATTERN SEQUENCER] button to access the PATTERN
UTILITY screen.
1. In the PATTERN UTILITY screen, select “SMF EXPORT” and press the [ENTER]
button.
The SMF EXPORT screen appears.
2. Enter a file name.
3. Press the [ENTER] button.
3. Move the cursor to the function that you want to execute, and press the
[ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4. Press the [ENTER] button to export the pattern.
Copying a Pattern (PATTERN COPY)
Here’s how you can copy from a different pattern to the specified track of the
currently selected pattern.
1. In the PATTERN UTILITY screen, select “PATTERN COPY” and press the
[ENTER] button.
The PATTERN COPY screen appears.
2. Set the parameters.
Parameter
Pattern bank
Pattern number
Source Pattern
Track
Destination
Pattern Track
Value/Explanation
Selects the copy-source pattern bank.
TEMP, PRST, USER
Selects the copy-source pattern.
001–032 (PRST), 001–128 (USER)
Selects the copy-source track.
TRACK ALL, TRACK 1–8
Selects the copy-destination track.
TRACK ALL, TRACK 1–8
Selects the content to be copied.
ALLThe pattern and sound settings are copied.
SOUND ONLYOnly the sound settings sre copied.
PATTERN ONLYOnly the pattern is copied.
Copy Target
3. Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
15
Overall Settings for the JUNO-DS
Accessing the Menu Screens
1. Press the [MENU] button.
The MENU screen appears.
Parameter
Curve Offset
Value/Explanation
Adjusts the Velo Curve.
Lower values make the keyboard feel lighter.
Higher values make the keyboard feel heavier.
-10–+9
Specifies the velocity transmitted when a key is played.
The transmitted velocity value will correspond to the force
REAL
with which you strike the key.
The transmitted velocity value will be fixed, regardless of
1–127
the force with which you strike the key.
Velocity
SOUND
Menu
Explanation
Displays a selection screen for items related to editing sounds.
5 PERFORMANCE EDIT (p. 10)
5 PART EDIT (p. 10)
5 EFFECTS EDIT (p. 10)
5 PATCH EDIT (p. 10)
5 DRUM KIT EDIT (p. 10)
5 SAMPLE EDIT (p. 9)
* For details, refer to “Parameter Guide (English)” (PDF).
Access the settings screen for patterns (p. 15).
Access the utility menu (p. 17).
Make settings of the entire JUNO-DS (p. 16).
Access a screen where you can view or delete favorite
registrations.
Create a user scale.
* For details, refer to “Parameter Guide (English)” (PDF).
Access a demo song playback screen (p. 18).
Master Tune
Master Tuning
Adjusts the overall tuning of the JUNO-DS.
The display shows the frequency of the A4 note (center A).
415.3–466.2 [Hz]
Shifts the JUNO-DS’s overall pitch range in semitone steps.
-24–+24
Sets the JUNO-DS’s overall volume.
0–127
Adjusts the output gain from the JUNO-DS’s output.
-12–+12 [dB]
Specifies the volume when playing audio file from the Audio Player.
0–127
Turn the master EQ (this is an equalizer that is applied to the overall sound
of the entire JUNO-DS) on/off.
OFF, ON
Frequency of the low range.
200, 400 [Hz]
Gain of the low frequency range.
-15–+15 [dB]
Frequency of the middle range.
200–8000 [Hz]
Gain of the middle frequency range.
-15–+15 [dB]
Width of the middle frequency range.
Set a higher value for Q to narrow the range to be affected.
0.5, 1.0, 2.0, 4.0, 8.0
Frequency of the high range.
2000, 4000, 8000 [Hz]
Gain of the high frequency range.
-15–+15 [dB]
Gain of the overall Master EQ.
-15–+15 [dB]
Adjusts the input level of the MIC INPUT jack.
0–127
EDIT
Master Key Shift
Master Level
Output Gain
Audio Level
MASTER EQ
Master EQ Switch
EQ Low Freq
EQ Low Gain
EQ Mid Freq
EQ Mid Gain
EQ Mid Q
EQ High Freq
PATTERN UTILITY
UTILITY
SYSTEM
FAVORITE UTILITY
USER SCALE
DEMO PLAY
2. Move the cursor to menu, and press the [ENTER] button.
* If a further menu appears, repeat step 2.
3. Move the cursor to tab, and use the [K] [J] buttons to switch the pages.
4. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
5. Press the [EXIT] button to exit the screen.
Making System Settings (SYSTEM)
Settings that are shared by the entire JUNO-DS are called “system settings.”
1. Press the [MENU] button.
The MENU screen appears.
EQ High Gain
EQ Total Gain
MIC IN SETTINGS
Mic In Level
2. Move the cursor to “SYSTEM,” and press the [ENTER] button.
3. Move the cursor to tab, and use the [K] [J] buttons to switch the pages.
4. Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
5. Press the [EXIT] button to exit the screen.
MEMO
The parameters you edit are saved when you press the [WRITE] button in the
SYSTEM screen, or when you exit the SYSTEM screen.
Parameter
GENERAL
LCD Contrast
Value/Explanation
Mic In Reverb
Switch
Mic In Reverb
Level
Mic In Reverb
Type
Mic In Reverb
Time
Noise Suppressor
Switch
Noise Suppressor
Threshold
Noise Suppressor
Release
Applying Reverb to the Mic Input
Specifies whether reverb is applied (ON) to the mic input or not applied
(OFF).
OFF, ON
Adjust the amount of reverb that is applied to the sound of the microphone.
0–127
Select the type of reverb/delay that is applied to the sound of the microphone.
ROOM1, ROOM2, STAGE1, STAGE2, HALL1, HALL2, DELAY, PAN-DELAY
Adjusts the length of the reverberation (when Reverb Type is ROOM1–
HALL2) or the delay time of the delay (when Reverb Type is DELAY or PAN-
DELAY).
0–127
Switches the noise suppressor on/off. The noise suppressor is a function
that suppresses noise during periods of silence.
OFF, ON
Adjusts the volume at which noise suppression starts to be applied.
0–127
Adjusts the time from when noise suppression starts until the volume
reaches 0.
0–127
Specifies the mic input mode.
ALLSound is input from the mic at all times.
Sound is input from the mic only when the [VOCODER/
VOCAL FXAUTO PITCH] button is lit, or when the effect type (see
“Parameter Guide (English)” (PDF)) is set to “79: Di VOCODER.”
Adjusting the Display Contrast
1–20
LCD Brightness
Adjusting the Display Brightness
1–20
Enabling/Disabling the Auto-Off Function
Auto Off
Specifies whether the unit will turn off automatically after a certain time
has elapsed.
If you don’t want the unit to turn off automatically, choose “OFF” setting.
OFF, 30, 240 [min]
Amount of idle time that is to pass before the JUNO-DS enters power-save
mode.
When the JUNO-DS enters power-save mode, it will reduce its power
consumption by turning off the display backlight and minimizing button
illumination.
OFF, 1, 3, 5, 10, 15, 20, 30, 60 [min]
Specifies whether the buttons illuminate when they are waiting for an
operation.
OFF, ON
Adjusts the brightness of pads [1]–[8].
1–127
The illumination color of pads [1]–[8] can be specified for each function.
* For details, refer to “Parameter Guide (English)” (PDF).
(OFF), 1–13
Sets the keyboard’s touch (p. 7).
LIGHT, MEDIUM, HEAVY
Power Save Time
Mic Mode
PEDAL
Control Pedal
Assign
Control Pedal
Polarity
Continuous Hold
Pedal
Hold Pedal
Polarity
Illumination
PAD COLOR
Pad Brightness
PAD COLOR
KEY TOUCH
Velo Curve
Assigning the Function of the Control Pedal
Specifies the function of the pedal that is connected to the PEDAL
CONTROL jack.
* For details, refer to “Parameter Guide (English)” (PDF).
Selects the polarity of the pedal connected to the PEDAL CONTROL jack.
STANDARD, REVERSE
If this is ON, the PEDAL HOLD jack will support half-pedaling.
OFF, ON
Selects the polarity of the pedal connected to the PEDAL HOLD jack.
STANDARD, REVERSE
16
Overall Settings for the JUNO-DS
Parameter
KNOB
Value/Explanation
Convenient Functions (UTILITY)
These functions let you back up the JUNO-DS’s internal data to a USB flash drive, or
to restore data from a USB flash drive into the JUNO-DS.
Other utility functions let you return the JUNO-DS to its factory-set state, or initialize
a USB flash drive.
Assigning the Function of the Control Knobs
Knob 1–4 Assign
Specifies the function that is assigned to each knob when the parameter
controlled by the control knobs is set to ASSIGN 1–4.
* For details, refer to “Parameter Guide (English)” (PDF).
Specifies the synchronization message that the JUNO-DS will use for
operation.
The JUNO-DS will be the master. Choose this setting when
MASTERusing the JUNO-DS by itself without synchronizing to
another device.
The JUNO-DS will be the slave. Choose this setting when
SLAVEyou want the JUNO-DS to synchronize to MIDI Clock
messages received from another MIDI device.
When the Sync Mode is “SLAVE,” this setting specifies whether the
JUNO-DS will synchronize to synchronization messages from the MIDI IN
connector or from the USB COMPUTER port.
MIDI, USB
Specifies the tempo when the JUNO-DS starts.
20–250
When you switch performances or patterns, this specifies whether the
tempo of the newly selected performance/pattern is used, or the current
tempo is maintained.
OFF, ON (maintain)
SYNC/TEMPO
1. Press the [MENU] button.
The MENU screen appears.
2. Move the cursor to “UTILITY,” and press the [ENTER] button.
The UTILITY screen appears.
Sync Mode
Clock Source
Menu
BACKUP
RESTORE
RESTORE (JUNO-Di)
FACTORY RESET
FORMAT USB MEMORY
Explanation
Backs up user data to the USB flash drive.
System and user setting (.SVD) and pattern (.BIN) files are created.
Restores data from the USB flash drive.
Loads JUNO-Di’s system settings and user data back into the unit.
Returns the JUNO-DS to the factory-set condition.
Initializes a USB flash drive.
Startup Tempo
Tempo Lock
METRONOME
Specifies how the metronome will be sounded.
OFFNo metronome is sounded.
PLAY-ONLYThe metronome sounds when a pattern is playing.
Metronome Mode REC-ONLYThe metronome sounds when a pattern is being recorded.
The metronome sounds when a pattern is playing or being
PLAY&REC
recorded.
ALWAYSThe metronome sounds at all times.
Adjusts the metronome volume.
Metronome Level
0–10
Selects the metronome sound.
TYPE1Conventional metronome sound (first beat is a bell)
Metronome
TYPE2Click sound
Sound
TYPE3Beep sound
TYPE4Cowbell sound
Metronome
Accent Switch
MIDI
Determines whether the internal sound generator is disconnected (OFF)
from the controller section (keyboard, pitch bend/modulation lever,
buttons, sliders, pedal, and so on); or not disconnected (ON). Normally
you’ll leave this “ON.” Choose the “OFF” setting if you want operations on
the JUNO-DS to only control DAW software on your computer.
OFF, ON
In patch mode, specifies the MIDI message transmit/receive channel for
the keyboard part.
1–16
Specifies the MIDI receive channel on which MIDI messages (program
change/bank select) from an external MIDI device will be received by the
JUNO-DS to switch performances. Choose “OFF” setting if you don’t want
performances to be switched from a connected MIDI device.
1–16, OFF
Specifies whether program change messages/bank select messages/active
sensing messages will be transmitted (ON) or not be transmitted (OFF).
OFF, ON
Specifies whether changes you make in the settings of a patch or
performance will be transmitted as system exclusive messages (ON), or will
not be transmitted (OFF).
OFF, ON
Specifies whether program change messages/bank select messages will
be received (ON) or not be received (OFF).
OFF, ON
If this is “ON,” incoming MIDI messages from the MIDI IN connector will be
re-transmitted without change from the MIDI OUT connector.
OFF, ON
Sets the USB driver.
* This setting will take effect when you turn the power off, then on again.
Choose this if you want to use the generic USB driver
GENERIC
provided by your computer’s operating system.
Choose this if you want to use a USB driver downloaded
VENDOR
from the Roland website. (*1)
* For details, refer to “Parameter Guide (English)” (PDF).
INFORMATION
Version
Expansion
*1:
View the software version.
Displays information about expansion sounds.
Adds an accent to the metronome sound.
OFF, ON
3. Move the cursor to the item that you want to execute, and press the [ENTER]
button.
Initializing USB Flash Drive (FORMAT USB MEMORY)
NOTE
5 If the USB Flash drive contains important data that you’ve created, be aware
that all of this data will be lost when you execute this operation.
5 Never turn off the power or remove the USB flash drives while the screen
indicates “Processing....”
1. In the UTILITY screen, move the cursor to “FORMAT USB MEMORY,” and
press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
2. Move the cursor to “OK,” and press the [ENTER] button.
When formatting is completed, the display indicates “Format Completed!”
Local Switch
The folder structure of a USB flash drive
Patch Rx/Tx Ch
EXPORT folder
Exported SMF files are saved in this folder.
Performance
Control Channel
Transmit
Program Change,
Bank Select,
Active Sensing
Transmit Edit
Data
Receive
Program Change,
Bank Select
Soft Through
IMPORT folder
Place files to be imported in this folder.
SONG LIST folder
Place audio files to be played using Audio Player in this folder.
ROLAND folder
Backup data is saved in this folder.
JUNO
BACKUP
USB Driver
CONTROL
Download the Driver
In order to use the JUNO-DS with the “VENDOR” setting, you must download the driver
from the following URL and install it on your computer.
For details on installation, refer to the following URL.
& http://www.roland.com/support/
17
Overall Settings for the JUNO-DS
Saving JUNO-DS’s Data to USB Flash Drive (BACKUP)
Here’s how to backup user data to USB flash drive.
Types of data that can be saved
Loading JUNO-Di Backup Data into the Unit (RESTORE (JUNO-Di))
JUNO-Di user data that was backed up to a USB flash drive can be loaded back into
the JUNO-DS.
5
5
5
5
User data for patches and performances
Favorites
User data for vocoder/auto pitch
Samples
5
5
5
5
NOTE
User patterns
System settings
User scale
DAW CONTROL
5 When you execute the restore operation, all user data is rewritten. If the
JUNO-DS contains important data, back it up on a USB flash drive using a
different name before you execute the restore operation.
5 Never turn off the power or remove the USB flash drive while the screen
indicates “Processing....”
NOTE
Never turn off the power or remove the USB flash drives while the screen indicates
“Processing....”
1. In the UTILITY screen, move the cursor to “RESTORE (JUNO-Di),” and press
the [ENTER] button.
The RESTORE screen appears.
2. Move the cursor to the file that you want to restore, and press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
1. In the UTILITY screen, move the cursor to “BACKUP,” and press the [ENTER]
button.
The BACKUP NAME screen appears.
3. Move the cursor to “OK,” and press the [ENTER] button.
4. Turn the power of the JUNO-DS off, then on again.
When restore is completed, the display indicates “Completed. Please Shut down.”
2. Enter the file name.
MEMO
For more about entering a name, refer to “Saving Your Settings (Write)” (p. 10).
Returning to the Factory Settings (FACTORY RESET)
You can return all of the JUNO-DS’s user settings to the state when the instrument
was shipped from the factory (Factory Reset).
3. When you’ve specified the file name, press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
NOTE
4. Move the cursor to “OK,” and press the [ENTER] button.
When backup is completed, the display indicates “Backup Completed!”
5 If the JUNO-DS’s internal memory contains important data that you’ve created,
be aware that all of this user data will be lost when you execute the factory
reset operation. If you want to keep this data, save it to USB flash drive before
you continue.
5 Never turn off the power or remove the USB flash drive while the screen
indicates “Processing....”
Restoring Saved Data from USB Flash Drive Back into the JUNO-DS
(RESTORE)
Here’s how to restore backed-up user data from USB flash drive into the JUNO-DS
(Restore).
1. In the UTILITY screen, move the cursor to “FACTORY RESET,” and press the
[ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
NOTE
2. Move the cursor to “OK,” and press the [ENTER] button.
5 When you execute the restore operation, all user data is rewritten. If the
JUNO-DS contains important data, back it up on a USB flash drive using a
different name before you execute the restore operation.
5 Never turn off the power or remove the USB flash drives while the screen
indicates “Processing....”
When factory reset is completed, the display indicates “Completed. Please Shut
down.”
3. Turn the power of the JUNO-DS off, then on again.
Playing the Demo Songs
1. Press the [MENU] button.
The MENU screen appears.
1. In the UTILITY screen, move the cursor to “RESTORE,” and press the [ENTER]
button.
The RESTORE screen appears.
2. Move the cursor to “DEMO PLAY,” and press the [ENTER] button.
The DEMO MENU screen appears.
3. Use the [K] [J] buttons to select a demo song, and press the [ENTER]
button.
*
2. Move the cursor to the file that you want to restore.
Deleting or renaming a file
Demo song playback starts.
No data for the music that is played will be output from MIDI OUT connector and
USB COMPUTER port.
1. In the RESTORE screen, press the [MENU] button.
The FILE UTILITY window appears. The window closes if you press the button
once again.
Explanation
When you press the [ENTER] button, the message “Are you sure?” appears.
Move the cursor to “OK” and press the [ENTER] button.
The selected file is deleted.
When you press the [ENTER] button, the RENAME screen appears, allowing
you to rename the selected file.
2. Move the cursor to “DELETE” or “RENAME,” and press the [ENTER] button.
Function
DELETE
RENAME
3. Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
When restore is completed, the display indicates “Completed. Please Shut down.”
4. Move the cursor to “OK,” and press the [ENTER] button.
5. Turn the power of the JUNO-DS off, then on again.
18
Appendix
Troubleshooting
If the JUNO-DS does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland service
center.
Problem
Cause/Action
Page
The power does not turn on
There is no sound
A specific Part does not sound
When I play the keyboard, notes do
not stop
Microphone sound is not output
Make sure that the JUNO-DS’s AC adaptor is correctly connected to an AC outlet and to the rear panel power connector, and that the adaptor itself and
p. 3
AC power cord are connected correctly.
If you connect the AC adaptor and turn on the power when batteries are installed, the AC adaptor will be used preferentially. Even if batteries are installed, the
power will not turn on unless the AC adaptor is connected to an AC outlet.
If you’re using batteries, disconnect the AC adaptor from the JUNO-DS. If batteries are installed, connecting or disconnecting the power cord from the outlet or
connecting or disconnecting the DC plug of the AC adaptor while the JUNO-DS is turned on will cause the power to turn off.
Is the power for connected amps and speakers turned on?
Could you have lowered the volume of your connected equipment?
Is the [MASTER VOLUME] knob turned all the way down?p. 5
Have connections been made correctly?p. 3
Can you hear sound through headphones?
If there is sound in the headphones, it is possible that the connection cables are broken, or that your amp/mixer has malfunctioned. Check your cables and amp/
mixer system once again.
If you do not hear sound when you play the keyboard, check whether the Local Switch is turned OFF.
p. 17
Make sure that the Local Switch setting is turned on.
Could the level of the tone (patch) be too low?
Check the level setting.
Could the level setting be too low?
p. 16
In the “SOUND” system settings, check the “Master Level” setting.
Could the keyboard switch be off?
Turn the keyboard switch on. For details, refer to “Parameter Guide (English)” (PDF).
Could a part be muted?
Turn mute off. For details, refer to “Parameter Guide (English)” (PDF).
Are the Effect settings correct?
Check the Effect settings ON or OFF.
Could the volume have been lowered by a MIDI message (volume message or expression message) received from the computer or by operating the pedal?
Could the patch’s tones be turned off?
Turn the Tone Switch “ON.” For details, refer to “Parameter Guide (English)” (PDF).
Has the volume level of the part been lowered?
Check the level of each part.
Could the [LEVEL] sliders be lowered?p. 2
Is the pedal polarity reversed?
p. 16
In the “PEDAL” system settings, check the “Control Pedal Polarity” or “Hold Pedal Polarity” setting.
Check the MIC [LEVEL] knob of the rear panel and [MIC IN] LEVEL slider.p. 8
Could the Mic In level be 0?
p. 16
In the “MIC IN SETTINGS” system settings, check the “Mic In Level” setting.
Could you be using a condenser microphone?
The JUNO-DS does not support condenser microphones.
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message appears.
Refer to the explanation for the error message that appears, and take the appropriate action.
Message
Battery Low!
Incorrect File!
MIDI Buffer Full!
MIDI Offline!
No More Favorites!
Not Found!
Now Playing!
Now Recording!
Meaning
The battery has run down.
This is a file that the JUNO-DS is unable to play/import.
An unusually large amount of MIDI data was received, and could not
be processed.
The MIDI IN connection was broken.
No more favorites have been registered.
The file was not found on the USB flash drive.
Since the JUNO-DS is playing, this operation cannot be executed.
Since the JUNO-DS is recording, this operation cannot be executed.
The maximum number of notes that can be recorded in one pattern
has been exceeded; the pattern cannot be recorded any further.
This indication may appear if a large amount of data, such as
movements of the Control knobs, is being recorded. No further
pattern recording is possible.
Failed to load data from USB flash drive.
It may be that the file is damaged.
This file cannot be loaded since its format is incorrect.
Since a large amount of recorded data was input all at once, it could
not be processed correctly.
It is possible that the contents of system memory have been
damaged.
USB flash drive is not connected.
Import is not possible because user memory is full.
Failed to write data to USB flash drive.
Data cannot be written because the USB flash drive has no more free
space.
The file or the USB flash drive itself is write protected.
Action
Replace the batteries, or use an AC adaptor.
Do not use this file.
Reduce the amount of MIDI messages that are being transmitted.
Check that there is no problem with the MIDI cable connected to the JUNO-DS’s MIDI IN,
and that the MIDI cable was not disconnected.
Check the currently selected favorite number and the direction (“FAV-UP” or “FAV-DOWN”)
that’s assigned to the pedal.
Make sure that the file exists on the USB flash drive.
Stop playback before you execute the operation.
Stop recording before you execute the operation.
Page
p. 3
Pattern Full!
Delete unneeded data from the pattern that you’re recording.
p. 14
Make sure that USB flash drive is correctly connected.
Do not use this file.
Reduce the amount of recorded data.
p. 14
Read Error!
Rec Overflow!
Sys Mem Damaged!
USB Mem NotReady!
Memory Full!
Write Error!
Please execute a Factory Reset.
If this does not resolve the problem, contact your dealer or a nearby Rolandp. 18
service center.
Connect USB flash drive.
Delete unneeded samples (patches).p. 9
Make sure that USB flash drive is correctly connected.
Delete unneeded files from the USB flash drive. Alternatively, use a different USB flash
drive device, one that has more free space available.
Make sure that the file or the USB flash drive is not write protected.
19
USING THE UNIT SAFELY
WARNING
Concerning the Auto Off function
The power to this unit will be turned off automatically
after a predetermined amount of time has passed since
it was last used for playing music, or its buttons or
controls were operated (Auto Off function). If you do not want
the power to be turned off automatically, disengage the Auto
Off function (p. 16).
WARNING
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied with the
unit. Also, make sure the line voltage at the installation
matches the input voltage specified on the AC adaptor’s
body. Other AC adaptors may use a different polarity, or
be designed for a different voltage, so their use could result in
damage, malfunction, or electric shock.
CAUTION
Use only the specified stand(s)
This unit is designed to be used in combination with
specific stands (*1) manufactured by Roland. If used
in combination with other stands, you risk sustaining
injuries as the result of this product dropping down or toppling
over due to a lack of stability.
Use only the stand that is recommended
This unit should be used only with a stand that is
recommended by Roland.
Use only the supplied power cord
Use only the attached power cord. Also, the supplied
power cord must not be used with any other device.
Evaluate safety issues before using stands
Even if you observe the cautions given in the owner’s
manual, certain types of handling may allow this product
to fall from the stand, or cause the stand to overturn.
Please be mindful of any safety issues before using this product.
Do not place in a location that is unstable
When using the unit with a stand recommended by
Roland, the stand must be carefully placed so it is level
and sure to remain stable. If not using a stand, you still
need to make sure that any location you choose for placing the
unit provides a level surface that will properly support the unit,
and keep it from wobbling.
Handle the ground terminal carefully
If you remove the screw from the ground terminal, be
sure to replace it; don’t leave it lying around where it
could accidently be swallowed by small children. When
refastening the screw, make that it is firmly fastened, so
it won’t come loose.
Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the “Parameter Guide
(English)” (PDF) carefully when placing this unit on a
stand.
If it is not set up properly, you risk creating an unstable
situation which could lead to the unit falling or the stand
toppling, and may result in injury.
Take care not to get burned
Batteries may reach a high temperature; please be careful
to avoid burning yourself.
*1: (61-key model) KS-18Z/KS-12, (76-key model) KS-18Z/KS-12, (88-key model) KS-18Z/KS-12/KS-G8B
IMPORTANT NOTES
Power Supply: Use of Batteries
• If the batteries run extremely low, the sound may distort, but
this does not indicate a malfunction. If this occurs, please
replace the batteries or use the included AC adaptor.
• If operating this unit on batteries, please use rechargeable Ni-
MH batteries.
• If operating this unit on batteries, please disconnect the AC
adaptor from this unit.
• Even if batteries are installed, the unit will turn off if you
connect or disconnect the power cord from the AC outlet while
the unit is turned on, or if you connect or disconnect the AC
adaptor from the unit. When this occurs, unsaved data may
be lost. You must turn off the power before you connect or
disconnect the power cord or AC adaptor.
Additional Precautions
• Any data stored within the unit can be lost as the result of
equipment failure, incorrect operation, etc. To protect yourself
against the irretrievable loss of data, try to make a habit of
creating regular backups of the data you’ve stored in the unit.
• Roland assumes no liability concerning the restoration of any
stored content that has been lost.
• Never strike or apply strong pressure to the display.
• The sound of keys being struck and vibrations produced by
playing an instrument can be transmitted through a floor or
wall to an unexpected extent. Please take care not to cause
annoyance to others nearby.
• Use only the specified expression pedal (EV-5; sold separately).
By connecting any other expression pedals, you risk causing
malfunction and/or damage to the unit.
• Continuous playing may cause dis-coloration of the pad, but
this will not affect the pad’s function.
• Do not use connection cables that contain a built-in resistor.
Intellectual Property Right
• It is forbidden by law to make an audio recording, video
recording, copy or revision of a third party’s copyrighted work
(musical work, video work, broadcast, live performance, or
other work), whether in whole or in part, and distribute, sell,
lease, perform, or broadcast it without the permission of the
copyright owner.
• Do not use this product for purposes that could infringe on a
copyright held by a third party. We assume no responsibility
whatsoever with regard to any infringements of third-party
copyrights arising through your use of this product.
• The copyright of content in this product (the sound waveform
data, style data, accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland Corporation.
• Purchasers of this product are permitted to utilize said content
(except song data such as Demo Songs) for the creating,
performing, recording and distributing original musical works.
• Purchasers of this product are NOT permitted to extract
said content in original or modified form, for the purpose of
distributing recorded medium of said content or making them
available on a computer network.
• ASIO is a trademark and software of Steinberg Media
Technologies GmbH.
• Roland and JUNO are either registered trademarks or
trademarks of Roland Corporation in the United States and/
or other countries.
• Company names and product names appearing in this
document are registered trademarks or trademarks of their
respective owners.
Placement
• Do not allow objects to remain on top of the keyboard. This can
be the cause of malfunction, such as keys ceasing to produce
sound.
• Depending on the material and temperature of the surface on
which you place the unit, its rubber feet may discolor or mar
the surface.
Using External Memories
• Please observe the following precautions when handling
external memory devices. Also, make sure to carefully observe
all the precautions that were supplied with the external
memory device.
• Do not remove the device while reading/writing is in
progress.
• To prevent damage from static electricity, discharge all static
electricity from your person before handling the device.
Care of the Keyboard
• Do not write on the keyboard with any pen or other implement,
and do not stamp or place any marking on the instrument. Ink
will seep into the surface lines and become unremovable.
• Do not affix stickers on the keyboard. You may be unable to
remove stickers that use strong adhesives, and the adhesive
may cause discoloration.
• To remove stubborn dirt, use a commercially available
keyboard cleaner that does not contain abrasives. Start
by wiping lightly. If the dirt does not come off, wipe using
gradually increasing amounts of pressure while taking care not
to scratch the keys.
Ground Terminal
• Depending on the circumstances of a particular setup, you
may experience a discomforting sensation, or perceive that the
surface feels gritty to the touch when you touch this device,
microphones connected to it, or the metal portions of other
objects. This is due to an infinitesimal electrical charge, which
is absolutely harmless. However, if you are concerned about
this, connect the ground terminal (p. 3) with an external
ground. When the unit is grounded, a slight hum may occur,
depending on the particulars of your installation. If you are
unsure of the connection method, contact the nearest Roland
Service Center, or an authorized Roland distributor, as listed on
the “Information.”
Unsuitable places for connection
• Water pipes (may result in shock or electrocution)
• Gas pipes (may result in fire or explosion)
• Telephone-line ground or lightning rod (may be dangerous in
the event of lightning)
Repairs and Data
• Before sending the unit away for repairs, be sure to make a
backup of the data stored within it; or you may prefer to write
down the needed information. Although we will do our utmost
to preserve the data stored in your unit when we carry out
repairs, in some cases, such as when the memory section is
physically damaged, restoration of the stored content may
be impossible. Roland assumes no liability concerning the
restoration of any stored content that has been lost.
20
IMPORTANT NOTES
Attaching the Ferrite Core (76-key model only)
If you use a USB cable to connect the JUNO-DS to your computer, you must attach
the included ferrite core. This is for the purpose of preventing electromagnetic
interference; do not remove it.
1. Attach the ferrite core to the USB cable.
Ferrite core
Band for fastening the core
0JUNO-DS
USB cable
10 cm
2. Press the halves together until they click shut.
*
*
Be careful not to pinch your fingers when attaching the ferrite core.
Do not damage the cable by pinching it excessively with the ferrite core.
21
Shortcut List
Shortcut
MODE
[SAMPLE IMPORT] + [DAW CONTROL]
Common section
[SHIFT] + [SELECT]
[SHIFT] + [VOCODER/AUTO PITCH]
[SHIFT] + [–] [+]
[SHIFT] + [J]
[SHIFT] + [K]
[SHIFT] + [NUMERIC]
[SHIFT] + [FAVORITE]
[SHIFT] + [0]
[SHIFT] + [1]
[SHIFT] + [2]
[SHIFT] + [3]
[SHIFT] + [9] ([SAMPLE])
[SHIFT] + [EXIT]
[SHIFT] + [ENTER]
KEYBOARD
[SPLIT] + keyboard
[SPLIT] + [DUAL]
[SHIFT] + [ARPEGGIO]
[SHIFT] + [KEY TOUCH]
[KEY TOUCH] + [TRANSPOSE]
[SHIFT] + [PATCH/PERFORM]
PHRASE PAD (Audio Player)
[SHIFT] + Pad [1]
[SHIFT] + Pad [2]
[SHIFT] + Pad [3]
[SHIFT] + [LOOP]
PHRASE PAD (Pattern Sequencer)
[SHIFT] + [LOOP]
[SHIFT] + [ERASE]
[SHIFT] + [PATTERN SEQUENCER]
[SHIFT] + [TEMPO]
[MUTE] + [ERASE]
Explanation
Displays the EDIT MENU screen.
All three SELECT indicators (K) that indicate the control knob function will light, allowing you to use the four control knobs to adjust the
volume of each part. Perform the same operation once again to return to the previous knob function.
* For details, refer to “Parameter Guide (English)” (PDF).
Displays the MIC IN SETTINGS screen. There you can specify the effect applied to the mic.
Makes the value change in larger steps.
Moves between tabs in setting screens such as system or edit.
Previews the sound of the currently selected part.
Displays the FAVORITE UTILITY screen. (Check/Delete Favorite)
Displays the PATCH EDIT screen. When a drum kit is selected, displays the DRUM KIT EDIT screen.
In Performance mode, this allows you to make MFX settings for the currently selected part. (Effect Edit)
Allows you to make chorus settings. (Effect Edit)
Allows you to make reverb settings. (Effect Edit)
Displays the SAMPLE EDIT screen.
Turns off the display backlight.
Turns on the display backlight.
Specifies the split point (if Split is on).
In split/dual, exchanges the upper (part 1) and lower (part 2) patches.
Displays the Arp Hold (OFF, ON) and ARPEGGIO screen. If the Arpeggio Switch is Off, the Arpeggio Switch is turned On.
Fixes the key touch.
Displays the USER SCALE screen.
Adjusts the volume of each part. (Part Edit)
Move to the beginning the audio file selected by the pad.
Rewinds the audio file selected by the pad.
Fast-forwards the audio file selected by the pad.
Specifies the loop point (Start and End) of the currently-playing audio file.
During pattern recording, when recording has reached the specified length of measures, this setting specifies whether to change from
recording to playback (LOOP REC OFF) or to continue recording (LOOP REC ON).
Displays the PATTERN ERASE screen.
Displays the PATTERN UTILITY MENU screen.
Turns the metronome on/off.
Erases data other than notes using the realtime erase function of the pattern sequencer.
Main Specifications
Roland JUNO-DS: Synthesizer Keyboard (Conforms to General MIDI 2 System)
61-key model
Keyboard
Power Supply
61 keys (with velocity)
76-key model
76 keys (with velocity)
88-key model
88 keys (Ivory Feel-G Keyboard with Escapement)
DC 9 V: AC adaptor or Ni-MH AA size rechargeable battery (AA, HR6) (sold separately) x 8
5 Battery life for continuous use (differs depending on the conditions of use)
Rechargeable nickel metal hydride batteries: approximately 5 hours (When using batteries having a capacity of 1,900 mAh.)
(approximately 4 hours if USB flash drive is connected)
* Carbon-zinc or alkaline batteries cannot be used
1,231 (W) x 311 (D) x 102 (H) mm
48-1/2 (W) x 12-1/4 (D) x 4-1/16 (H) inches
6.9 kg / 15 lbs 4 oz
Owner’s manual, Leaflet “USING THE UNIT SAFELY,” AC
adaptor, Power cord, Ferrite core (including Band for
fastening the core)
1,415 (W) x 341 x (D) x 144 (H) mm
55-3/4 (W) x 13-7/16 (D) x 5-11/16 (H) inches
16.2 kg / 35 lbs 12 oz
Owner’s manual, Leaflet “USING THE UNIT SAFELY,” AC
adaptor, Power cord
Keyboard stand (*1): KS-18Z, KS-12, KS-G8B
*1:
When using the KS-18Z, ensure that the height of the unit is one meter or lower.
Current draw
600 mA
Dimensions
Weight
Accessories
1,008 (W) x 300 (D) x 97 (H) mm
39-11/16 (W) x 11-13/16 (D) x 3-7/8 (H) inches
5.3 kg / 11 lbs 12 oz
Owner’s manual, Leaflet “USING THE UNIT SAFELY,” AC
adaptor, Power cord
Keyboard stand (*1): KS-18Z, KS-12
Pedal switch: DP series
Expression pedal: EV-5
Options
(sold separately)
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
MEMO
For details on how to place this unit on a stand, refer to “Placing This Unit on a Stand” in “Parameter Guide (English)” (PDF).
22
Komentar
Posting Komentar